Why the Thar Roxx Needs a Screen Guard More Than Most Cars

The Thar Roxx gave the Thar something the older one never had: a proper twin-screen cabin. A 10.25-inch infotainment touchscreen sits in the centre, and a 10.25-inch digital instrument cluster faces the driver. Both are glossy. Both catch light. And in a Roxx, both spend a lot of time in dust, sun and open-roof weather that a regular sedan dashboard never sees.

That matters because of how the Roxx is actually used. Fine trail dust settles on the screen, and the next time you swipe to change the track, that dust becomes sandpaper. Over a few months you get a haze of fine swirl marks that catch every ray of afternoon sun. Fingernails, rings, key fobs on the dash and a co-passenger's watch strap do the rest. None of this is covered by warranty, and a replacement infotainment display costs many multiples of a ₹449 guard.

The cluster is the sneakier problem. You never touch it, so most owners assume it is safe — until a phone slides off the dash, a cleaning cloth picks up grit, or sunlight through the open roof turns every micro-scratch into glare exactly where your speed readout sits.

Thar Roxx (2024–2026) — Every Compatible Gear Guard Product

These are the products confirmed to fit the Mahindra Thar Roxx 2024–2026. Screen guards first, then the interior and exterior pieces most Roxx owners pair with them.

Best Value · Both Screens

Thar ROXX 10.25" Infotainment + Instrument Cluster Screen Guard (Combo) [2024–2026]

Both screens covered in one pack. Anti-glare finish, 9H scratch protection, precise Roxx-specific cut. Costs less than buying the two guards separately.

₹699 Buy Combo

Most Popular · Touchscreen Only

Mahindra Thar ROXX 10.25" Screen Guard [2024–2026]

Anti-glare guard for the central 10.25-inch infotainment display. Full touch sensitivity retained, bubble-free fit, cut to the exact Roxx bezel.

₹449 Buy Now

Driver Display · MID

Mahindra Thar Roxx Instrument Cluster Screen Guard [2024–2026]

Protects the digital instrument cluster behind the steering wheel from scratches and dust haze. Anti-glare, bubble-free installation.

₹499 Buy Now

Pair It With: The Rest of the Thar Roxx Range

Bestseller

Premium Carbon Fiber Door Sill Protector with Logo

Branded carbon-fibre-finish sill trim that stops scuffs from muddy boots — a real problem in a Roxx.

₹499 View

Set of 4

Carbon Fiber Car Door Sill Guard — Set of 4

Covers all four sills. No-drill adhesive backing, sporty carbon weave finish.

₹899 View

Mahindra Fit

Car Metal Shape Key Cover for Mahindra Cars

Zinc alloy and silicone cover for the Roxx key fob. 360° protection, no signal interference.

₹699 View

Off-Road

Car Shock Absorber Protector Rubber Guard

Shields suspension shafts from dust, grit and rust — worth it if your Roxx actually goes off-tarmac.

₹399 View

Styling

Owners Club 3D Metal Sticker

Weatherproof 3D metal badge with strong adhesive backing. A staple on Thar tailgates.

₹499 View

Styling

METAL WINGS 3D Logo Car Badge Emblem

Solid metal 14cm × 5cm emblem, self-adhesive, fits any vehicle exterior panel.

₹599 View

Which Thar Roxx Screen Guard Should You Buy?

Also Compatible: Mahindra Thar (2020–2025 & 2025–2026)

The Thar Roxx is a separate model from the three-door Thar, and the two use completely different screens — a Roxx guard will not fit a standard Thar. If you drive the regular Thar, these are the guards cut for your car.

How to Fit a Thar Roxx Screen Guard (Bubble-Free, 10 Minutes)

1. Park in shade and switch the car offDirect sun makes the adhesive grab too fast and shows every speck of dust. A cool, powered-off screen is far easier to work on, and a dark screen shows dust you would otherwise miss.
2. Clean the screen twiceFirst pass with the wet wipe to lift oils, second pass with the dry microfibre. Let it dry fully. Any smear left behind becomes a permanent rainbow under the film.
3. Lift dust with the sticker tabPress the supplied dust-removal sticker onto any remaining specks and peel. Do this last, right before you position the guard — this single step prevents most bubbles.
4. Dry-align before peelingHold the guard over the screen and line it up with the bezel edges and any camera or sensor cut-outs. Note where it sits, then peel the backing.
5. Land it from one edgeTouch the top edge down first and let the film fall onto the screen gradually rather than dropping it flat. This pushes air out ahead of the film instead of trapping it.
6. Squeegee from the centre outwardUse the card wrapped in microfibre. Work centre to edges. Small bubbles usually clear on their own within 24–48 hours as the adhesive settles.

Why Gear Guard for the Thar Roxx

Cut for the Roxx, not for "10.25-inch screens". A generic 10.25" film sold by screen diagonal alone will overhang the Roxx bezel or leave a visible gap. Our Roxx guards are cut to this car's exact panel outline, including the bezel radius, so the edge disappears into the trim.

Anti-glare matters in an open-roof car. The Roxx sees more direct overhead light than most SUVs. Our anti-glare finish diffuses reflection rather than mirroring the sky back at you, which is the difference between reading the nav at noon and guessing at it.

Built for Indian conditions. 9H hardness handles grit-loaded fingers; the oleophobic top layer means monsoon humidity and greasy dhaba-stop fingerprints wipe off instead of smearing.

Touch response is unchanged. The film is thin enough that pinch-zoom on the map and swipe gestures behave exactly as they did on bare glass — a common worry, and a non-issue here.

Thar Roxx Screen Guard — FAQs