The second-generation Brezza that landed in 2022 turned a sensible compact SUV into a genuinely well-equipped one — a 9-inch SmartPlay Pro+ touchscreen on ZXi+, a separate climate control display, a sunroof and 360-degree camera on the top trims. Every one of those upgrades put another piece of gloss-black plastic in the cabin, and gloss black shows every scratch.

This guide lists every Gear Guard product confirmed to fit a Brezza, split by generation. If you own the current car (2022 onwards, including the 2026 model year) start with the section below. If you drive the original 2016–2022 Vitara Brezza, skip to the compatibility section — we cut a separate guard for that dashboard.

Brezza 2022–2026 — Compatible Gear Guard Products

These fit the second-generation Brezza, including the 2026 model year. The two screen guards are cut to this generation's exact display dimensions; everything else is a Maruti-wide or universal fitment.

Start here

Maruti Suzuki Brezza Touch Screen Protector [2022–2026]

Cut for both the 7-inch and 9-inch VXi/ZXi units. 9H hardness, anti-glare coating, bubble-free installation.

₹449 View Product

Most overlooked

Maruti Suzuki Brezza AC Panel Screen Guard [2022–2026]

The climate display sits low and catches rings, keys and fingernails. This anti-glare guard keeps it clean and fully touch-sensitive.

₹299 View Product

Best value

Suzuki Carbon Fiber Door Sill Protector

Suzuki-branded sill guards for the painted door sills — the first place an SUV picks up shoe scuffs. Waterproof and heat-resistant.

₹499 Buy

Full set

Carbon Fiber Door Sill Guard — Set of 4

Full-length carbon-weave guards for all four doors. Strong no-drill adhesive backing, sportier finish.

₹899 Buy

Everyday use

Metal Shape Key Cover — Maruti Suzuki

Zinc alloy and silicone cover for the Brezza remote key. Precise fit, 360-degree protection, no signal interference.

₹699 Buy

Cabin comfort

Seat Belt Alarm Stopper — Maruti Suzuki

Plug-in stopper shaped for Maruti buckles. Silences the chime instantly — compact and built to last.

₹399 Buy

Premium

Luxury Gunmetal Seat Belt Stopper — Pack of 2

Rust-resistant zinc alloy, VIP engraved logo, gunmetal finish. Two pieces — one for each front seat.

₹999 Buy

Styling

METAL WINGS Suzuki 3D Sticker — 14cm x 5cm

Raised chrome-finish Suzuki wings badge. Strong no-drill adhesive — sits well on the Brezza's flat tailgate.

₹599 Buy

Universal fit

METAL WINGS 3D Logo Badge Emblem

Solid metal 14cm x 5cm decorative emblem with self-adhesive backing. Fits any vehicle exterior panel.

₹599 Buy

Styling

Owners Club 3D Metal Sticker

Weatherproof 3D metal badge with strong adhesive backing — a favourite at Brezza owner-club meets.

₹499 Buy

Under ₹300

Suzuki 3D Steering Wheel Logo Sticker (Black)

Crystal-accented carbon fiber overlay that refreshes a worn steering wheel logo. Precise fit, easy application.

₹299 Buy

Under-body

Shock Absorber Protector Rubber Guard

Slip-on rubber guard shielding the shocks from dust, rust and wear — worth it if your Brezza sees broken roads.

₹399 Buy

Also Compatible: Vitara Brezza (2016–2022)

The first-generation Vitara Brezza used a completely different dashboard and a smaller SmartPlay screen, so it needs its own guard. Everything universal in the list above — sill guards, key cover, seat belt stoppers, 3D badges — fits the older car exactly the same way.

Brezza Accessories Compared

How to Fit a Brezza Screen Guard Properly

1. Work in shade with the engine offA warm dashboard makes the adhesive grab instantly and traps bubbles. Early morning or covered parking gives you the best result.
2. Wet wipe, then dry cloth — one direction onlyBoth wipes are in the box. Circular wiping pushes dust around instead of lifting it off the glass.
3. Use the dust sticker across the whole screenPress and peel the included dust-removal sticker over the display. This lifts the fine particles the cloth misses, which is what causes almost every bubble.
4. Dry-fit before peeling the backingHold the guard in position and check the edges against the bezel. On the 9-inch ZXi+ unit the surround is tight — confirm alignment before committing.
5. Peel halfway and lay from the centre outSet the middle down first, then sweep outward with the card. Peel the rest of the backing and repeat for the other half.
6. Give it 24 hours before judgingSmall air pockets clear on their own as the adhesive cures. Only push out large bubbles, always toward the nearest edge.

Why Brezza Owners Choose Gear Guard

Cut per generation, not "universal". A generic 9-inch guard bought online will overhang the Brezza's bezel or leave a dust gap along one edge. Ours are cut to each generation's actual display, which is why we list 2016–2022 and 2022–2026 as separate products.

Made for Indian conditions. A Brezza parked in the open crosses 60°C inside during summer. Our adhesives do not lift or yellow at those temperatures, and the sill protectors are waterproof and heat-resistant for monsoon and highway use.

Nothing here needs a workshop. Every product on this page is adhesive-backed, plug-in or slip-on. No drilling, no trim removal, no wiring — you can fit the whole list yourself in an afternoon.

Free shipping on prepaid orders across India, and 10% off your first order with code FIRST10.

Brezza Accessories — Frequently Asked Questions